Install VNC server on your ROCK Pi 4 | Connect ROCK Pi via VNC

In this tutorial we learn How to install VNC Server on your ROCK Pi 4. So we use the Ubuntu image on Rock Pi 4.

Recommended : ROCK Pi 4 : Overview | Installation

Install VNC server on your ROCK Pi 4

• Install VNC server

   sudo apt-get install xfce4
   sudo apt-get install vnc4server
   sudo apt-get install xrdp

• Run the VNC server and setting password

   sudo vncserver

• Edit the config file

   sudo vim ~/.vnc/xstartup

• Change the contents to:

   #!/bin/sh
   unset SESSION_MANAGER
   unset DBUS_SESSION_BUS_ADDRESS
   [ -x /etc/vnc/xstartup ] && exec /etc/vnc/xstartup
   [ -r $HOME/.Xresources ] && xrdb $HOME/.Xresources
   vncconfig -iconic &
   xfce4-session & 

• Restart the vncserver and xrdp

   sudo vncserver -kill :1            #Kill the vncserver process
   sudo vncserver                     #Restart the vncserver
   sudo service xrdp restart          #Restart the xrdp

Install VNC client on your PC run on linux

• Installation

You need a VNC-Viewer-6.19.325-Linux-x64.deb pack click here download it now.

   sudo dpkg -i VNC-Viewer-6.19.325-Linux-x64.deb

• Connecting ROCK Pi 4

Power on your ROCK Pi 4 and ensure it connect the network.

Type on your PC:

   vncviewer 'this is your ROCK Pi 4's IP address':1

If you don’t known what your ROCK Pi 4’s IP address type this on your ROCK Pi 4 you can see it:

   ifconfig         #type 'man config' can get help for ifconfig

If your ROCK Pi 4’s IP address is 192.168.31.196 you type vncviewer 192.168.31.196:1 can connect it, and then input your VNC password can open the desktop.

Explore some more Rock Pi 4 Stuff:

• ROCK Pi 4 : Overview | Installation
• ROCK Pi 4 Backup and Restore uSD card or eMMC module
• Rock Pi 4 – Radxa APT
• Armbian | How To use with Rock Pi 4
• Rock Pi 4 GPIO Description
• Setup Docker on Rock Pi 4
• RockPi 4 – Write image to SPI flash from USB OTG port
• ROCK Pi 4 Linux system runs on M.2 NVME SSD

I hope you like this post “Install VNC server on your ROCK Pi 4”. Do you have any questions? Leave a comment down below!

Thanks for reading. If you like this post probably you might like my next ones, so please support me by subscribing my blog.

You may like also:

• How To Create Secure MQTT Broker
• Setting up Authentication in Mosquitto MQTT Broker
• IoT Communication APIs
• IoT Enabling Technologies
• Best Arduino IDE alternatives to start programming
• Best IoT Visual Programming Tools