The New Arduino Portenta H7

Announced today at CES is the Arduino Portenta H7 module. Arduino, the open-source hardware platform, today announced the launch of a new low-code platform and modular hardware system for IoT development.

Arduino Portenta H7 Overview

Portenta H7 simultaneously runs high level code along with real time tasks. The design includes two processors that can run tasks in parallel. For example, is possible to execute Arduino compiled code along with MicroPython one, and have both cores to communicate with one another. The Portenta functionality is two-fold, it can either be running like any other embedded microcontroller board, or as the main processor of an embedded computer. Use the Portenta Carrier board to transform your H7 into an eNUC computer and expose all of the H7 physical interfaces.

Portenta can easily run processes created with TensorFlow™ Lite, you could have one of the cores computing a computer vision algorithm on the fly, while the other could be making low level operationis like controlling a motor, or acting as a user interface.

Use Portenta when performance is key, among other cases, we envision it to be part of:

• High-end industrial machinery
• Laboratory equipment
• Computer vision
• PLCs
• Industry-ready user interfaces
• Robotics controller
• Mission-critical devices
• Dedicated stationary computer
• High-speed booting computation (ms)

Two Parallel Cores

H7’s main processor is a dual core unit made of a Cortex® M7 running at 480 MHz and a Cortex® M4 running at 240 MHz. The two cores communicate via a Remote Procedure Call mechanism that allows calling functions on the other processor seamlessly. Both processors share all the in-chip peripherals and can run:

• Arduino sketches on top of the Arm® Mbed™ OS
• Native Mbed™ applications
• MicroPython / JavaScript via an interpreter
• TensorFlow™ Lite

Graphics Accelerator

Probably one of the most exciting features of the Portenta H7 is the possibility of connecting an external monitor to build your own dedicated embedded computer with a user interface. This is possible thanks to the processor’s on-chip GPU, the Chrom-ART Accelerator™. Besides the GPU, the chip includes a dedicated JPEG encoder and decoder.

A new standard for pinouts

The Portenta family adds two 80 pin high density connectors at the bottom of the board. This ensures scalability for a wide range of applications by simply upgrading your Portenta board to the one suiting your needs.

On-board Connectivity

The onboard wireless module allows to simultaneously manage WiFi and Bluetooth® connectivity. The WiFi interface can be operated as an Access Point, as a Station or as a dual mode simultaneous AP/STA and can handle up to 65 Mbps transfer rate. Bluetooth® interface supports Bluetooth Classic and BLE. It is also possible to expose a series of different wired interfaces like UART, SPI, Ethernet, or I2C, both through some of the MKR styled connectors, or through the new Arduino industrial 80 pin connector pair.

USB-C Multipurpose Connector

The board’s programming connector is a USB-C port that can also be used to power the board, as a USB Hub, to connect a DisplayPort monitor, or to deliver power to OTG connected devices.

Multiple options in one board

Order the default Arduino Portenta H7 (codename H7-15EUNWAD) that comes with:

• 2MB SDRAM
• 16MB NOR Flash
• 10/100 Ethernet Phy
• USB HS
• NXP SE050C2 Crypto
• WiFi/BT Module
• Ceramic Antenna
• DisplayPort over USB-C

If you need more memory, Portenta H7 can host up to 64 MByte of SDRAM, and 128 MByte of QSPI Flash. Order it with an external UFL connector for adding a higher-gain antenna to the board. Decide between crypo-chips from Microchip® and NXP. The board is highly customizable in volumes, ask our sales representatives for options.

Arduino Portenta H7 Tech Specs

The Arduino Portenta H7 is based on the STM32H747 microcontroller, XI series.

Microcontroller	STM32H747XI dual Cortex®-M7+M4 32bit low power ARM MCU (datasheet)
Radio module	Murata 1DX dual WiFi 802.11b/g/n 65 Mbps and Bluetooth 5.1 BR/EDR/LE (datasheet)
Board Power Supply (USB/VIN)	5V
Secure Element (default)	MXP SE0502 (datasheet)
Supported Battery	Li-Po Single Cell, 3.7V, 700mAh Minimum (integrated charger)
Circuit Operating Voltage	3.3V
Current Consumption	2.95 μA in Standby mode (Backup SRAM OFF, RTC/LSE ON)
Display Connector	MIPI DSI host & MIPI D-PHY to interface with low-pin count large display
GPU	Chrom-ART graphical hardware Accelerator™
Timers	22x timers and watchdogs
UART	4x ports (2 with flow control)
SD Card	Interface for SD Card connector (through expansion port only)
Operational Temperature	-40 °C to +85 °C (excl. Wireless module) / -10 °C to +55 °C (incl. Wireless module)
MKR Headers	Use any of the existing industrial MKR shields on it
High-density Connectors	Two 80 pin connectors will expose all of the board’s peripherals to other devices
Camera Interface	8-bit, up to 80 MHz
ADC	3× ADCs with 16-bit max. resolution (up to 36 channels, up to 3.6 MSPS)
DAC	2× 12-bit DAC (1 MHz)
USB-C	Host / Device, DisplayPort out, High / Full Speed, Power delivery

Arduino Portenta H7 Pinout Diagram

The Portenta H7 follows the Arduino MKR form factor, but enhanced with the Portenta family 80 pin high-density connector.

Download the full pinout diagram as PDF here.

The plummeting price of hardware, which led to the capable computing movement, computing that is “good enough,” as well as the arrival of boards running MicroPython and JavaScript, changed the hardware landscape rather profoundly, and Arduino didn’t seem to adapt. Or at least, not quickly enough.

The new Portenta H7 will be made generally available next month, although it is available in limited quantities now for beta customers — initially it is being targeted towards enterprise and SMB customers — and if you happen to be at CES this week the Arduino team is in town showing off the hardware here in Las Vegas.

Source : https://store.arduino.cc/usa/portenta-h7

I hope you like this post. Do you have any questions? Leave a comment down below!

Thanks for reading. If you like this post probably you might like my next ones, so please support me by subscribing my blog.

You may like also : InfluxDB | Time Series Database ? | TickStack | Tickscript ?