Friday, March 29, 2024
ESPHow ToIoT HardwaresTutorials/DIY

Installing the ESP32 Board in Arduino IDE | ESP32

In this tutorial we Installing the ESP32 Board in Arduino IDE, First install or update latest Arduino IDE from arduino.cc/en/Main/Software.

Installing the ESP32 Board in Arduino IDE

IMPORTANT NOTE:

  1. If this is your first time installing the ESP32 on the Arduino IDE, simply follow the installation procedure described below;
  2. If you’ve already installed the ESP32 add-on using the old method, you should remove the espressif folder first. Go to the end of this post to learn how to remove the espressif folder.

1. Installing the ESP32 Board

To install the ESP32 board in your Arduino IDE, follow these next instructions:

1) Open the preferences window from the Arduino IDE. Go to File> Preferences

2) Enter https://dl.espressif.com/dl/package_esp32_index.json into the “Additional Board Manager URLs” field as shown in the figure below. Then, click the “OK” button:

preference

Note: if you already have the ESP8266 boards URL, you can separate the URLs with a comma as follows:

https://dl.espressif.com/dl/package_esp32_index.json, http://arduino.esp8266.com/stable/package_esp8266com_index.json

3) Open boards manager. Go to Tools > Board > Boards Manager…

arduino ide

4) Search for ESP32 and press install button for the “ESP32 by Espressif Systems“:

boards manager

5) That’s it. It should be installed after a few seconds.

2. Deleting the espressif folder

If this is your first time installing the ESP32 on Arduino IDE you can ignore this section. If you’ve followed the older installation procedure and you’ve manually installed the ESP32 add-on with Git GUI, you need to remove the espressif folder from your Arduino IDE.

To find your espressif folder and Arduino IDE location (installation path), open your Arduino IDE and go to File > Preferences:

Copy the location from the “Sketchbook location” field:

Go to your Arduino IDE location directory: C:\Users\hvm\Documents\Arduino and open the hardware folder:

Then, delete the espressif folder:

Testing the Installation

Plug the ESP32 board to your computer. Then, follow these steps:

1) Open the Arduino IDE

2) Select your Board in Tools > Board menu (in my case it’s the DOIT ESP32 DEVKIT V1)

esp board

3) Select the Port (if you don’t see the COM Port in your Arduino IDE, you need to install the ESP32 CP210x USB to UART Bridge VCP Drivers):

4) Open the following example under File > Examples > WiFi (ESP32) > WiFi Scan

5) A new sketch open in new window

6) Press the Upload button in the Arduino IDE. Wait a few seconds while the code compiles and uploads to your board.

7) If everything went as expected, you should see a “Done uploading.” message.

8) Open the Arduino IDE Serial Monitor at a baud rate of 115200:

9) Press the ESP32 on-board Enable button and you should see the networks available near your ESP32

Done!

I hope you like this post “Installing the ESP32 Board in Arduino IDE”. If have you any query please write in comment box. And you can share this post “Installing the ESP32 Board in Arduino IDE”.


Recommended : 


 

Harshvardhan Mishra

Hi, I'm Harshvardhan Mishra. Tech enthusiast and IT professional with a B.Tech in IT, PG Diploma in IoT from CDAC, and 6 years of industry experience. Founder of HVM Smart Solutions, blending technology for real-world solutions. As a passionate technical author, I simplify complex concepts for diverse audiences. Let's connect and explore the tech world together! If you want to help support me on my journey, consider sharing my articles, or Buy me a Coffee! Thank you for reading my blog! Happy learning! Linkedin

2 thoughts on “Installing the ESP32 Board in Arduino IDE | ESP32

Leave a Reply

Your email address will not be published. Required fields are marked *